Luminizing Face Mask

Author Image

By: TOM BRANNA

Editor

Luminizing Face Mask
Ingredients
%

Phase A-1

  • Water (demineralized)
  • 67.76
  • Tetrasodium EDTA
  • 0.10
  • Sorbitol (Liponic 70-NC/Lipo)
  • 3.00
  • Allantoin (RonaCare Allantoin/Rona)
  • 0.20
  • Aloe vera gel (Aloe Vera Gel 10X/Terry Labs)
  • 1.00

Phase A-2

  • Xantham gum (Vanzan NF/Vanderbilt)
  • 0.50
  • Magnesium aluminum silicate (Veegum HS/Vanderbilt)
  • 5.50
  • Kaolin (Colloidal Kaolin/Whittaker)
  • 12.00

Phase B

  • Cetearyl alcohol, cetearyl glucoside (Montanov 68/Seppic)
  • 5.00
  • Sweet almond oil (Lipovol ALM/Lipo)
  • 2.00
  • Capric caprylic triglycerides (Myritol 318/Cognis)
  • 3.00
  • Shea butter (Cetiol SB-45/Cognis)
  • 2.50
  • Beeswax (White Beeswax/Strahl & Pitsch)
  • 3.00
  • Bisabolol (RonaCare Bisabolol Nat./Rona)
  • 0.20

Phase C

  • Water (demineralized)
  • 5.00
  • Emblica officinallis extract (Emblica/Rona)
  • 1.00

Phase D

  • Sodium citrate (50% sol) (to pH- 5.0)
  • 0.20

Phase E

  • D&C Green #3 (1% sol)
  • 0.04
  • Fragrance (Fresh & Clean # Frag. 101077/Intarome)
  • 0.10
  • DMDM hydantoin, methylparaben, propylparaben (Paragon II/McIntyre)
  • 1.00

Procedure

Combine A-1; disperse A-2 in A-1 while stirring and heat A to 70°C. Combine ingredients of phase B, then heat to 70°C. Add phase B to A with good mixing. Homogenize mixture at moderate speed while cooling to 40°C. When temperature reaches 40°C, add premixed phase C; stir gently until mixture is homogeneous. Adjust pH with phase D to 5.0 then add ingredients of phase E in the listed order. Mix until uniform.

More Information

Rona Cosmetics/EMD Chemicals, Inc., 7 Skyline Drive, Hawthorne, NY 10532
Tel: (914) 592-4660; Fax: (914) 592-9469; Website: www.emdchemicals.com